What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 01:42

Edit 2024–10.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Android 16's new beta makes changing call settings easier - Android Police
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are three different concepts here that are getting confused.
What are the signs of covert narcissistic abuse that most people miss?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
what exactly is a ‘surge’ protector?
The bolt then partially travels down the line to your home.
Barnstars:
nine
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Judge rejects Newsom’s emergency request to limit Trump LA troop deployment - The Hill
but I think this circuit , shows a few more pieces.
It seems Mohan does not understand the difference between a comment and an Answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes the function of a fuse.
Person with measles visited Boston hotel, museum, airport, health officials warn - NBC Boston
This one hit behind the barn.
Now when you have a certain ac resistance, then a current flows in a loop.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Rob Thomson ejected, Luzardo roughed up against Brewers - Phillies Nation
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
He then describes Rainy Season and Lightning.
In schematic diagrams this is the symbol for a fuse:
2024–10–10[John johnson John Johnson ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, what happens?
[image of Common-mode choke]
This is where this question deviates from being a 'generic' question, and becomes more specific.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
A fuse is a non-resetable over current circuit protector.
a photo is worth a thousand words.
But… the neutral is now “floating” because of the 1 ohm resistance.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is 'the assistant's answer'
Here is a simplified AC power diagram.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There are two important concepts here.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
These devices are installed between the “hot” and “neutral” and protective ground.
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The other is “what does a “fuse” do?”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What is lightning?
This is where the MOV conducts again, and dissipated the energy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
eight
This device then solves the entire problem.
What does a fuse do?
First Sentence:
the problem then depends on "how fast does the fuse operate?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then asserts :
At one ohm, the resistor has a maximum of 1 watt power.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–16 [ OO OLAOYE OYEBODE ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
A circuit breaker is similar, but is resettable.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It also is a device that limits the change in current flow.
(Dc diagram shown, AC is similar).
One
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".